Investigation of Mechanical Properties of Polymer Coatings on Surfaces
Main Article Content
Abstract
In this work, the mechanical properties of organic coatings based on epoxy resin (DGEBA DER 332) and two diamines comonomers (IPD and 3DCM) on the surface of aluminum and titanium alloy plates were investigated. It has been proven that Young's modulus and internal residual stress of coatings depend on the thickness of the coating, the degree of reaction and the substrate material. During the thermal cure cycle, a loss of curing agent was observed and thus a change in the degree of reaction of the coating. The results showed that Young's modulus and stress of thin coatings are very different from volumetric values.
Downloads
Metrics
Article Details
Licensing
TURCOMAT publishes articles under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This licensing allows for any use of the work, provided the original author(s) and source are credited, thereby facilitating the free exchange and use of research for the advancement of knowledge.
Detailed Licensing Terms
Attribution (BY): Users must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses them or their use.
No Additional Restrictions: Users may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.