Study on Track Frame Model of a Thai-Made Rice Combine Harvester

Main Article Content

Khongdet Phasinam, et. al.

Abstract

A rice combine harvester has an important role in Thai rice production and has been popular in Thai farmer. Almost
Thai-made rice combine harvester is too heavy and large in size. Because the track frame of Thai-made rice combine harvester
is a main component that affects the harvester’s size and weight, the objectives of this research, therefore, were to investigate
and improve the track frame strength using the finite element method (FEM). Similitude analysis was employed for determining
the proper scale of experimental frame. The strength analysis using the loading test with experimental frame was used to verify
the accuracy of the FEM. Two field-work conditions of the harvester’s header were selected namely horizontal position and
maximum lift position. The FEM results showed that the maximum stresses of those conditions were 91.13 MPa and 91.69 MPa,
respectively, while the maximum deflection 2.31 mm and 2.36 mm, respectively. The experimental results from the loading tests
confirmed that the strength analysis of track frame using FEM had a high accuracy and could be applied in practical use. The
improvement of the track frame model could increase the strength about 40% and reduce mass about 18%.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Article Details

How to Cite
et. al., K. P. . (2021). Study on Track Frame Model of a Thai-Made Rice Combine Harvester . Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(8), 2799–2808. Retrieved from https://turcomat.org/index.php/turkbilmat/article/view/4039
Section
Research Articles