Design Parametric Optimization Of Wall Following Robot
Main Article Content
Abstract
In recent years, the trajectory tracking control of mobile robots has been a subject of research. This aim of the work is to achieve a minimum path traveling time of the wall following robot by optimizing the design parameters of the robot. The input parameters are wheel diameter, caster wheel position and turn radius. The output parameter is the tracking time. Three levels of wheel size, castor wheel position and turn radius are considered. The methods used are Taguchi method, Hybrid Neural network fuzzy logic method and Genetic algorithm.The values obtained from neural network algorithm are very close to the experimental value.
Downloads
Metrics
Article Details
Licensing
TURCOMAT publishes articles under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This licensing allows for any use of the work, provided the original author(s) and source are credited, thereby facilitating the free exchange and use of research for the advancement of knowledge.
Detailed Licensing Terms
Attribution (BY): Users must give appropriate credit, provide a link to the license, and indicate if changes were made. Users may do so in any reasonable manner, but not in any way that suggests the licensor endorses them or their use.
No Additional Restrictions: Users may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.