Static Analysis of the Effect of Shape Memory Alloy in Laminated Beam
Main Article Content
Abstract
This study deals with the effect of shape memory alloy in carbon/epoxy laminated beam. In this study we analyses static response of laminated beam under the load of 10 KN at the mid span of the beam. In this study a cantilevered beam of dimension 1000mm length, 100mm width and 30mm height which is divided in 3 layers of 10mm each is considered. The study includes three cases. In first case all the 3 layers of beam is laminated with carbon/epoxy. In second case the top and the bottom layers are laminated with carbon/epoxy and middle layer is2qw laminated with shape memory alloy. In the third case the top and the bottom layers are laminated with shape memory alloy while the middle with carbon/epoxy. Loading and boundary conditions are same for all the three cases. All the analysis is done using ANSYS workbench 15.0
Downloads
Metrics
Article Details
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.